XSR 700 Forums banner
1 - 20 of 30 Posts

·
Registered
Joined
·
185 Posts
I have my objections for the guy making the video, about his technical knowledge and expertise. I have already left him a comment on his video. No offense if it is someone from this forum!!
 

·
Registered
Joined
·
185 Posts
At 2:26 he says that the parts are not finished, the are supposed to be like this in order the threads to hold the screw.

At 3:51 he can't even read the scheme and install the screen. He is supposed to unscrew the front screws on the head light. If you don't do that there is no way the screen will go all the way in, in order for it to be safely installed.
Here are the installing directions:
http://www.puig.tv/descargas/PUIG11759.pdf
 

·
Registered
Joined
·
212 Posts
Thanks, collecting my XSR at the weekend. Will get evotech for fork and swing arm. ....do they spin?


Difficult to decide for the frame, R&G, rizoma and barracuda are on the shortlist. Concerned that Rizoma and Barracuda won't give enough protection in the event of a drop.
 

·
Registered
Joined
·
216 Posts
I must admit when you look at the instructions i found online it doesnt look like you need to undo the bolt of the headlamp frame when you just look at the brackets as they slide down but as per the video not fully and he did not put the spacers in either. I like the look of the short screen has anyone got this? Piks welcome!!!!
 

·
Registered
Joined
·
12 Posts
Hello everyone. I thought I'd post my experience with this screen. Bought it from Germany, ?40 delivered, 4 days later, a little trimming with the dremel to the bracket and voila! I'm happy!
 

Attachments

1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top