XSR 700 Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Installing aftermarket front turns; everything worked fine before today. New indicators do not have a running light. Hooked up the light per instructions; no flash. Tried different combinations, still no flash. Thought maybe I shorted something and plugged the stock indicator back in. Running lights work, but now no turn signals work AND it does not show on the MFD that the bike is signaling. Checked the fuse, looks good, switched it anyway, still the same problem. Help?
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #3 ·
It was a fuse, just not the signal fuse. It was marked 10A Park in the box that is mounted more towards the rear. The thread you linked clued me in to check all the 10A fuses so thanks.
 

·
Registered
Joined
·
1 Posts
Installing aftermarket front turns; everything worked fine before today. New indicators do not have a running light. Hooked up the light per instructions; no flash. Tried different combinations, still no flash. Thought maybe I shorted something and plugged the stock indicator back in. Running lights work, but now no turn signals work AND it does not show on the MFD that the bike is signaling. Checked the fuse, looks good, switched it anyway, still the same problem. Help?
Looking at this thread. I might be having the same issues. Your front running lights were working, but when you reconnected rear lights, no lights?
 

·
Registered
Joined
·
1 Posts
HELP!
So same issue as above. Replaced my 7.5A Park fuse which had blown but still no indicators even with stock.
Other fuses are fine.
This is my daily comuter so hoping you guys can help me.
 
1 - 6 of 6 Posts
Top