XSR 700 Forums banner

R&G tail tidy

13522 Views 21 Replies 14 Participants Last post by  dan1
Hi you guys :grin2:

This is the last mod that I've done.

First I changed the whole tail for the R&G tail tidy, then I added the reflector below, and finally I installed two led blinkers found in a shop in Barcelona, I paid 30 euros for them and they are small and the quality looks good enough.

In my opinion, it looks much better now and clearer.


vssss

Attachments

See less See more
5
1 - 20 of 22 Posts
Looks good man, can someone explain the main reason for blanking out their number plate?
Yeah, looks better.
Looks good.

I was thinking about ordering this myself, but on the pictures it looked a bit flimsy. Are you happy with the quality?
I decided to do something about the tail myself, I'm almost finished, will post some pictures soon.

Also I'm really happy that our number plates here in Switzerland are much smaller :).
  • Like
Reactions: 1
That does look super nice, I like the small led signals on either side, keeps it nice and clean
Looks good man, can someone explain the main reason for blanking out their number plate?
Cause it makes it vulnerable from web sniffers and easier for thefts to duplicate plates for stolen XSR looking like photos posted...

Besides those bad considerations, the R&G tail is a nice alternative to the round stock rear light, pretty cool look. I preferred fitted S2 Concept tail tidy, like Ben who shared pics (thanks for that). I first hesitated with the Barracuda also discussed in another topic but the S2 keeps intact the original design of the tail, by just removing the ugly plate holder, which I wanted...

I fitted back the stock blinkers like (for now) after removing the flexible part of it, which make them half shorther!

Here is a pics.

Attachments

See less See more
  • Like
Reactions: 3
Clean look. Would be cool if we had a hideaway plate for bikes :D Just a simple setup that tucks it under
Cause it makes it vulnerable from web sniffers and easier for thefts to duplicate plates for stolen XSR looking like photos posted...

Besides those bad considerations, the R&G tail is a nice alternative to the round stock rear light, pretty cool look. I preferred fitted S2 Concept tail tidy, like Ben who shared pics (thanks for that). I first hesitated with the Barracuda also discussed in another topic but the S2 keeps intact the original design of the tail, by just removing the ugly plate holder, which I wanted...

I fitted back the stock blinkers like (for now) after removing the flexible part of it, which make them half shorther!

Here is a pics.
How do you fix the stock blinkers ? Have you got a pic nearer ?
Nice mods ;)
Looks good.

I was thinking about ordering this myself, but on the pictures it looked a bit flimsy. Are you happy with the quality?
I decided to do something about the tail myself, I'm almost finished, will post some pictures soon.

Also I'm really happy that our number plates here in Switzerland are much smaller :).
I'm pretty happy with the quality, the only thing that I found it was while I was riding it shoock too much with the bumps on the road, but I've done an upgrade and now the whole structure is strong enough.

Here one more picture where you can see better how the final result is.

In my opinion, this tail tidy is one the best ones, you can appreciate the rear wheel much more!!! :grin2:

Attachments

See less See more
@teet xops is this the tail tidy you purchased? does it come with the tail light and indicators in the photo? http://www.rg-racing.com/browsebike/Yamaha/XSR700/2016/LP0193BK/#prettyPhoto
Tx,
Druid
@teet xops is this the tail tidy you purchased? does it come with the tail light and indicators in the photo? http://www.rg-racing.com/browsebike/Yamaha/XSR700/2016/LP0193BK/#prettyPhoto
Tx,
Druid
Yes, it comes just with tail light, and 4 adaptors for new blinkers, that's it!
  • Like
Reactions: 2
Cause it makes it vulnerable from web sniffers and easier for thefts to duplicate plates for stolen XSR looking like photos posted...

Besides those bad considerations, the R&G tail is a nice alternative to the round stock rear light, pretty cool look. I preferred fitted S2 Concept tail tidy, like Ben who shared pics (thanks for that). I first hesitated with the Barracuda also discussed in another topic but the S2 keeps intact the original design of the tail, by just removing the ugly plate holder, which I wanted...

I fitted back the stock blinkers like (for now) after removing the flexible part of it, which make them half shorther!

Here is a pics.
How do you fix the stock blinkers ? Have you got a pic nearer ?
Nice mods
I removed the flexible part of the blinkers (that have a notch specially designed for the stock tail) in order to have a sort of plane surface to work with. As a compensation I just added a seal washer in order to absorb vibrations. Finally I reused the screw that originally fixed blinkers on the stock tail. Here are few pics taken in my garage, sorry the bad light.. :)

Attachments

See less See more
5
Thanh you very much Jul, pics are very good ;)
Merci Jul ! Je ne me rappelais plus que sur les clignos Yamaha on pouvait virer la partie en caoutchouc qui laissait apparaître une vis de fixation :)
Très belle XSR. Je suis en train d'en chercher une. Projet pour la rentrée si les impôts ne sont pas trop méchants :)
Thanh you very much Jul, pics are very good

Merci Jul ! Je ne me rappelais plus que sur les clignos Yamaha on pouvait virer la partie en caoutchouc qui laissait apparaître une vis de fixation

Très belle XSR. Je suis en train d'en chercher une. Projet pour la rentrée si les impôts ne sont pas trop méchants
You're welcome hotwheels! Cross fingers for the tax return, mine will for sure make me waiting more again for changing the exhaust :(
Good move by adding the washer
Thanks I'll let you know how it turns out after few long rides on bumpy roads ;)
I removed the flexible part of the blinkers (that have a notch specially designed for the stock tail) in order to have a sort of plane surface to work with. As a compensation I just added a seal washer in order to absorb vibrations. Finally I reused the screw that originally fixed blinkers on the stock tail. Here are few pics taken in my garage, sorry the bad light.. :)
Hey Jul,
In a previous post you mentioned this is an S2 tail tidy. The only one I know from them for our bike is the one with the plate holder attached to the rear swingarm, hanging behind the rear wheel. Is this also from S2? Can you post a link to the product?

I realise this is a 2 year old post but this is exactly what I am looking for, so I hope you still see this!
I removed the flexible part of the blinkers (that have a notch specially designed for the stock tail) in order to have a sort of plane surface to work with. As a compensation I just added a seal washer in order to absorb vibrations. Finally I reused the screw that originally fixed blinkers on the stock tail. Here are few pics taken in my garage, sorry the bad light.. /forum/images/smilies/smile.gif
Hey Jul,
In a previous post you mentioned this is an S2 tail tidy. The only one I know from them for our bike is the one with the plate holder attached to the rear swingarm, hanging behind the rear wheel. Is this also from S2? Can you post a link to the product?

I realise this is a 2 year old post but this is exactly what I am looking for, so I hope you still see this!
I have the same one.
https://www.s2-concept.com/boutique...fiques/support-de-plaque-yamaha-xsr700-detail
  • Like
Reactions: 2
Looks good.


Also I'm really happy that our number plates here in Switzerland are much smaller :).
That is a rather large plate.
We have a smaller version here.

Attachments

See less See more
Thanks! The website says you need additional lights. Do they mean the license plate lights?
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top