XSR 700 Forums banner

Photo request (Throttle Cable route)

3050 Views 7 Replies 2 Participants Last post by  nightic
Hi all,

Just changed over my Throttle Cables, to shorter MT-07 stock ones (shorter and hence much neater when using a lower handlebar).
However, I was interupted between removing the old cables and fitting the new ones, can cannot be 100% sure that I routed them -exactly- as per the factory.
Would any one mind taking a few quick photos (just requires the left side panel that covers the regulator to be removed - 2 screws) to show the exact placement of the cables?
(It's not completely obvious, even when viewing the Service Manual illustrations.)

Thanks in advance,
1 - 8 of 8 Posts
2
Bump with a couple of photos of the current routing.
I'd especially like to know whether the factory Throttle Cables pass under or over the other nearby Cables.

Attachments

See less See more
Tried to post pictures of what u requested, but unabled to.....I can email them to you if you want...Anthony
Tried to post pictures of what u requested, but unabled to.....I can email them to you if you want...Anthony
Cheers, Anthony, that would be much appeciated.
My email is my [email protected] (replacing the first part of the address).
just sent...hope it helps
Got them - thanks.
Seeing some slight differences, more related to the other Cable bundles.
May I ask what model year your XSR700 is?
(For reference, mine was a 2017, with the factory changes made that year, i.e. the Black Radiator covers)
2
2018 ...United States model
Interesting - looks like they're using a difference Harness-wrap as well.
Hope you don't mind but will add your photos below, in case they're helpful to others too.

Attachments

See less See more
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top