[OverVolt]

Hi,
someone knows the TRAF-X Xlight02

http://www.carpimoto.com/Images/Products/Zoom/TRAF-X_Led_Indicator_Turn_Signal_Clignotant_Blinker_Freccia_X-Light_01.jpg

This kind of led flasher looks like very good.
But the question is: the XSR700 needs to change the blinker flasher with a new one or the bike is ready for LED flasher? I don't like resistor beetwen the lights and the electrics, if necessary I'll change the flash relais.

Someone knows the answer?

OverVolt

 

[krm700]

Go for the relais change, forget about resistors.

 

[TheCrow]

I'm pretty sure you'll need to do either or. But if it was up to me, relay change all day. So much simpler and less time consuming. Life made easy.

 

[Tracker]

I'd go for relay change too. A five minute job.
If you don't already know, you can find it behind the left side cover, next to the voltage regulator/rectifier.

 

[OverVolt]

Thanks to all for the replies!
@Tracker: I need to disassemble the voltage regulator to find the relay or it is near the regulator?

@All: someone have changed the LED flasher?
Because I don't like to cut the original wires is possible to recycle the original cabling from the original flasher?
Yamaha uses specific power connector for the flasher (eg: http://www.mt-series.it/uploads/monthly_07_2014/post-3575-0-63689600-1405338712.jpg) that I could buy form online store but I find this unnecessary and costly...

OverVolt

 

[Tracker]

Thanks to all for the replies!
@Tracker: I need to disassemble the voltage regulator to find the relay or it is near the regulator?

@All: someone have changed the LED flasher?
Because I don't like to cut the original wires is possible to recycle the original cabling from the original flasher?
Yamaha uses specific power connector for the flasher (eg: http://www.mt-series.it/uploads/monthly_07_2014/post-3575-0-63689600-1405338712.jpg) that I could buy form online store but I find this unnecessary and costly...

OverVolt

There is no need to disassemble anything.
You only have to remove the black side cover and you will find the flasher relay next to voltage regulator.

 

[OverVolt]

Hi Tracker,
do you know how many pins have the flash relais? Two or three?

tnx in advance,
OverVolt

 

[Tracker]

Hi Tracker,
do you know how many pins have the flash relais? Two or three?

tnx in advance,
OverVolt

@OverVolt The relay is 2 pin.

Attached a picture so you can also see the fitting/connection type.

 

[OverVolt]

Thanks for the pict Tracker.
Now I know who the connector is


Bye,
OverVolt

 

[OverVolt]

Hi again
from an eBay seller I have bought a digital blinker for LED Flasher.
The connector seems the same of the original Yamaha blinker connector.

Now I must only wait that it arrives to my home :wink2:

Bye,
OverVolt

 

[rikstill]

Anyone have a link to the correct fitment of LED flasher unit? I bought this but discovered the pin layout is incorrect. I have had a good look around but can't actually see a unit that will fit. Unless I am looking at the wrong component on the bike...

 

[denniswkok]

Anyone a working link to the correct led relais....so we are sure we get the right one...
Thanks guys.

From overhere in Holland.

Cheers
Dennis

 

[hotwheels]

You can get the BIHR led flasher for Yamaha or buy a led flasher from TST Industries

BIHR : https://www.motoblouz.com/vente-centrale-de-clignotants-bihr-pour-yamaha-59380.html

TST INDUSTRIES : https://tstindustries.com/TST-LED-Flasher-Relay-Gen2.html
...I have this one because of a cool option : Adjustable functionality to speed up or slow down flash rate to your preference

 

[denniswkok]

You can get the BIHR led flasher for Yamaha or buy a led flasher from TST Industries

BIHR : https://www.motoblouz.com/vente-centrale-de-clignotants-bihr-pour-yamaha-59380.html

TST INDUSTRIES : https://tstindustries.com/TST-LED-Flasher-Relay-Gen2.html
...I have this one because of a cool option : Adjustable functionality to speed up or slow down flash rate to your preference

Thanx Mr. Paris !

Gonna get me some nice Led blinkers..... and of we go.

Seeya
Cheers
Dennis

 

[racingkoala]

You can get the BIHR led flasher for Yamaha or buy a led flasher from TST Industries

BIHR : https://www.motoblouz.com/vente-centrale-de-clignotants-bihr-pour-yamaha-59380.html

TST INDUSTRIES : https://tstindustries.com/TST-LED-Flasher-Relay-Gen2.html
...I have this one because of a cool option : Adjustable functionality to speed up or slow down flash rate to your preference

20€??? I got this for less than 2€ and has been going strong ever since.

 

[hotwheels]

20€??? I got this for less than 2€ and has been going strong ever since.

Only one question : where ?
Aliexpress ?

Please share

 

[racingkoala]

Only one question : where ?
Aliexpress ?

Please share

Click "this" on my previous post

 

[hotwheels]

Click "this" on my previous post

Thanks for us

 

[magic77]

Just fitted a set of Yamaha official LED indicators. Did away with the resistors in the pack and bought a new relay on amazon


Yosoo 2 Pin 12V Auto motorcycle LED Turn Indicator Light Flasher Relay

https://www.amazon.co.uk/gp/product/B01CJ5SVXQ/ref=ppx_yo_dt_b_asin_title_o07__o00_s01?ie=UTF8&psc=1
https://www.amazon.co.uk/gp/product/B01CJ5SVXQ/ref=ppx_yo_dt_b_asin_title_o07__o00_s01?ie=UTF8&psc=1


no issues