XSR 700 Forums banner

Bar End Mirrors and Heat Grips

4308 Views 5 Replies 5 Participants Last post by  denniswkok
First small modification over the weekend:

Oxford heated grips (Sports) - Recieved as a late Christmas Present

A cheap but sturdy pair of Bar End Mirrors https://www.amazon.co.uk/gp/product/B00H5IM5TY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1


Turning a few more heads with the lower profile mirrors, bit more of a retro look.

Attachments

See less See more
1 - 6 of 6 Posts
Mirrors are definitely nice and it's one of those things you don't really need to spend much on. Have you tested the Oxford heated grips yet?
Agree - at £7.00 ($10) can't go much wrong

The grips are pretty good, more keeping the palms warm then the fingertips... but summer is nearly here :grin2:
I'm a fan of the mirrors hanging under the level of the bars. As if you rotated the clamps 180°. Looks mean 😎
I used these mirrors on my FZ/MT-07. If you buy them, buy an extra set. I broke one while installing them by cranking them too tight. I also had to get a metal spacer to get them on the stock bar ends. It looks like there's no issues here. Once I figured out the install, I loved them! They looked sharp and increased my field of view over the stock bug eye mirrors. Once I get the XSR I'll be throwing them on!
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top