XSR 700 Forums banner

Status
Not open for further replies.
1 - 20 of 38 Posts

·
Registered
Joined
·
191 Posts
Discussion Starter #1
Got a few accessories that I'm not using...

Puig screen, if anyone wants to have it, I'll ship it for 30€ anywhere in the EU. It came with the bike and the previous owner didn't use it much. It's like new. See thread http://www.xsr700forums.com/forum/146-yamaha-xsr700-parts-accessories/3370-xsr700-puig-medium-screen-review.html for more info about the screen. All I'm selling is in the picture, no additional parts. I believe this screen needs a little trimming to the attachment parts (see thread) which I think has already been done. I never used it myself.

I'm also selling the original yamaha mesh inserts for the side covers. 32€ shipped. https://www.yamaha-motor.eu/pt/produtos/motociclos/sport-heritage/xsr700.aspx?view=accessories&partcode=B34-F17U0-00-00&year=2017

Yamaha numbers (https://cdn.yamaha-motor.eu/accessories/genuine-options/stickers/800-75-800/B34-FSTKT-00-00-numbers-sticker-kit-black-studio-001.jpg ), unopened, 25€ shipped.

80€ for everything and I'll include a metal lid for the rear brake oil reservoir :) Bank transfer or paypal net to my account.

I'll also consider selling the yamaha bag stays and heritage bag (250€ plus shipping), although I'm not sure how economically it would be to ship across Europe due to weight.

As a result of some mods I'm considering, in the near future I may sell the Vintech rear light (https://www.yamaha-motor.eu/pt/binary/453-100/LightenUp_finalworkfile_GIF2_tcm222-689639.gif ) 100€, like new and 23 months remaining warranty, the 4 Arizona blinkers ( https://shop.thunderbike.de/en/Thunderbike-Parts/Electric-Lighting/Turn-Signals/Arizona-Turn-Signal-Set.html ) 60€. Excellent condition except for a very small chip that I have marked in the attached photo. Expressions of interest welcome.

I am interested in the yamaha handguards, the original yamaha tool roll (if I don't sell the bag), akrapovic catalyzer for high exhaust, if anyone wants to sell / exchange.

Luis
 

Attachments

·
Registered
Joined
·
37 Posts
Hey racingkoala, can I take the mesh inserts off your hands?
Are you also selling the evotech headlight grill in the last photo?
Cheers
 

·
Registered
Joined
·
67 Posts
You have 4 identical black turn indicators?
I might be interested. Can you please post a picture of the rear of your bike please?
And maybe a closer look on the chip in the one in the front?
 

·
Registered
Joined
·
145 Posts
Not in the market for new indicators just yet, but are the Arizona one's plug and play, or do you have to adapt the XSR's wiring?
 

·
Registered
Joined
·
191 Posts
Discussion Starter #6
The bulbs are 21W, so you need a new relay or change the bulbs to 10W, otherwise the emergency signal will not work. The bulbs are BAX9S mount. In principle I'll be able to throw in the relay as well as I'll be moving over to LED indicators. But you'll also need adapters to mount the indicators in the stock location, like these: http://www.ebay.ie/itm/LED-Mini-Blinker-Adapter-Spacer-Platten-Yamaha-TDM-900-FZ1-FZS1000-Fazer-YZFR6-/291833828050?hash=item43f2a6d2d2:g:zbwAAOSwtnpXnk8Q

Apart from this it's plug and play. For more photos of my bike, see my thread here: http://www.xsr700forums.com/forum/218-yamaha-xsr700-pictures/5290-list-my-mods-pictures.html
 

·
Registered
Joined
·
191 Posts
Discussion Starter #8
50 euro for the indicators including shipping to Belgium?
Not yet sure if I'm redoing the turn signals. I'd like to replace the rear lights with just two multifunction lights and get rid of the tail light altogether. But have not made up my mind yet. I will update this when firm.

Luis
 

·
Registered
Joined
·
67 Posts
50 euro for the indicators including shipping to Belgium?
Not yet sure if I'm redoing the turn signals. I'd like to replace the rear lights with just two multifunction lights and get rid of the tail light altogether. But have not made up my mind yet. I will update this when firm.
Luis
Okay, please let me know once you've made your decision.
 

·
Registered
Joined
·
191 Posts
Discussion Starter #12
Right now, the Puig Screen and the yamaha number stickers are still available. 50€ shipped anywhere in the EU. And I'll throw in this wonderful brake oil reservoir full metal lid :)


Luis
 

Attachments

·
Registered
Joined
·
191 Posts
Discussion Starter #15
Vintech and Arizona Blinkers now for sale

Still waiting for the turn signals to be set free! :)
I've finally decided to ditch the tail light and redo indicators so the Vintech and Arizona blinkers are now available. I should receive the new multi-function indicators next week, so in principle if all goes according to plan they'll be ready to ship by the end of the week. Same for the Vintech, though I could probably ship it earlier as I still have the original tail light.

The Vintech was bought on 2/8/2017, so a little over a month old. It's new for all purposes, it's plug and play (comes with connectors) and I'll include the bill/receipt (official Yamaha dealer) so it is warranted til 1/8/2019. 100€ shipped anywhere in the EU (paypal, fees to be borne by buyer if you don't want to pay as "send money to family and friends").

Images of the actual tail light:








The Arizona blinkers are one year old and one one has a very tiny chip as shown in the pictures. The others are perfect. You'll need to splice the cables or get yamaha connectors. They go for about 100€ or more for 4 units, see:

https://www.bonnefication.shop/products/arizona-turn-signals-pr

https://www.amazon.de/SHIN-YO-Mini-Blinker-ARIZONA/dp/B00FVBITJM

60€ shipped anywhere in the EU (paypal, fees to be borne by buyer if you don't want to pay as "send money to family and friends").

images:






PM if interested.

Luis
 

Attachments

·
Registered
Joined
·
191 Posts
Discussion Starter #16
... and I'd rather sell everything in one go to avoid work and not be left with stuff with no use for me... if anyone wants the whole lot for 190€ I'll do the deal. That's the Puig windscreen, the yamaha numbers, the oil reservoir cap, the blinkers and the tail light.
 

·
Registered
Joined
·
191 Posts
Discussion Starter #17
... another thing I forgot. The Arizona blinkers are 21W so need a 21W relay. The turn signals will work normally with the OEM 10W relay, but emergency (all signals flashing simultaneously) will not. If you get the whole lot, I'll include the relay. And 2 adapters to install the front units in the stock locations. At the back I have attached mine on a bracket just behind the number plate, so did not need any adapters.

Luis
 

·
Registered
Joined
·
191 Posts
Discussion Starter #20
Vintech and Puig screen sold.

I'll be receiving led bulbs for the blinkers that I can let go for the same price. No relay for that though, but it can be bought for less than 2€ from china. Comment about the chip on the front right unit... it's almost unnoticeable, the macro pictures above make it look much more visible than they actually are. I'll post additional pictures when they're off the bike.

Luis
 
1 - 20 of 38 Posts
Status
Not open for further replies.
Top